Diy: Make Your Own Brochure Holder From a Tissue Box

by ezipop in Craft > Cardboard

19095 Views, 17 Favorites, 0 Comments

Diy: Make Your Own Brochure Holder From a Tissue Box

1_tissue-box.jpg
2_tools.jpg
3_other-packs.jpg
4_cut-the-box.jpg
5_cut-off-end-flaps.jpg
6_marking-out.jpg
7_cut-out-the-body.jpg
8_body-of-brochure-holder.jpg
9_crease-the-body.jpg
10_cut-off-scrap.jpg
11_cut-off-glue-flap.jpg
12_fold-strut-piece.jpg
13_mark-angle-line.jpg
14_cut-angle-piece-off.jpg
15_rear-strut.jpg
16_crease-the-strut.jpg
17_body-and-strut.jpg
18_staple-strut-to-body.jpg
19_staple-both-ends.jpg
20_tape-the-front-pocket.jpg
21_completed-holder.jpg
22_show-off.jpg
If you've ever had a need for one or two brochure holders to display your message at markets, at your club, or other limited applications, you've probably wondered if you could somehow make your own from something around the house.

Here we show you how you can recycle an empty facial tissue box into a brochure holder suitable to display DL or trifold brochures and the price couldn't be better, it's FREE. You're being kind to the environment too, the tissue box gets another life as a display product. Of course you could also use any other empty packaging box such as cereal packs and you can adjust the measurements to suit other sized brochures. To see the captions a little clearer, zoom in with your web browser. © EZIPOP

We'll leave it to you to decorate your brochure holder how you like, we actually like the look of the plain brown board. If you need more than one or two brochure holders, take a look at our Generic EZIPOPs, we can supply as few as 5 if that's all you need.