Diy Finger Air Board

so I was bored on the school bus so here is how to make a finger air board you can use it by going to your vent (with air) and surf the air. you can finger spin it and use it in front of the fan.

cardboard (small)
scissors
glue
paper with design (for graphics)

first, draw your finger board's size then cut it out.

after you have cut ou the board, bend it into a v shape. make sure it's not bent all the way. then bend the sides to make grips.

so this is the last step. use anything that has a design. trace your board into the paper with a design cut out the board's trace and paste it under the board. then you're done! print out the camouflage paper and use it for graphics.