Diy Customized Fidget Spinner(Rainbow Fidget Spinner)

by ROBO HUB in Craft > Art

2993 Views, 9 Favorites, 0 Comments

Diy Customized Fidget Spinner(Rainbow Fidget Spinner)

Handspiner.jpg

Hello Friends,If You are bored of Your Fidget Spinner and Want To Customize it You are at the Right Place

All You Need Is

  1. Fidget spinner(which is to be customized)
  2. Cardboard
  3. Colour pens
  4. Paperglue
  5. Scissors

Video Showing Customizing Fidget Spinner

Diy Customized Fidget Spinner

You May Find Some Interesting Stuffs in My Channel :)

Measurements

1.png
2.png

The Measurements Of Inner And Outer Radius Of Fidget Spinner is Taken(Which Needs To Be Customized)

Markings

3.png
4.png
5.png
6.png
7.png
8.png

  • The measurements are Marked on Cardboard
  • Cut using scissors
  • Fidget Spinner is Coupled With Cut Cardboard
  • Do Same For Other Side also
  • Let it Dry

Covering the Body

9.png
10.png
11.png
12.png
13.png

  • Thin Cardboard Strip is Cut
  • Glued To Edges Of Cardboard
  • Excess Strip is Cut
  • Allowed To Dry

Colouring

15.png
16.png

Here Comes The Most Interesting Part

Finishing

17.png
19.png
fidget 2.jpg
  • Caps Are Attached

Fidget Spinner Is Ready!!!What I Observed is There was a Increase in Spin Time after customizing,Hope you enjoyed my instructable!!!

Dont Forget To Share This Instructable With Your Family And Friends