Diy Coat Hanger Under 5USD

You can see how I made this coat hanger,because I bought industrial one and was not strong enough.

18cm pieces of flt steel 3cm

you can see here how I made,step by step hangers from flat steel 18cm lenght of 1 piece.

from left to right the steps to final cut.

Before insulating the hangers, their surface must be thoroughly cleaned of dirt and rust, treated with degreasing compound, apply a primer coat.

after the protection layer is dryed,I painted with black for contrast with the wood.

fix the hangers at the same distance,20cm in my case.

I secured the wood from the wall and now is waiting for the clothes :)