Disposable Dustpan / Scoop
![cover.JPG](/proxy/?url=https://content.instructables.com/F2W/TNRE/I9NE4BTS/F2WTNREI9NE4BTS.jpg&filename=cover.JPG)
![disposable dustpan.png](/proxy/?url=https://content.instructables.com/FWN/08VI/I9NE4BTT/FWN08VII9NE4BTT.png&filename=disposable dustpan.png)
Zero commercial offerings inspired my disposable dustpan. Made with one sheet of 8.5" x 11" posterboard. For use where a disposable scoop is required or preferred, such as in a bodily fluid cleanup kit.
Secure joints using a glue gun.
TIP:To make the bends precisely, use a ruler as a clamping bar.
Measure, mark, and bend AS SHOWN IN DIAGRAM:
1. Measure center point on long edge.
2. Measure "a" four times. (= twice on each long edge) 1 3/8"
3. Mark fold lines 1 and 2
4. Fold 1's in, and unfoldish.
5. Fold 2's in. Glue.
6. Measure "b" on both sides 3 1/2"
7. Mark fold lines 3
8. Fold both 3's in. Glue.
9. Fold tips in to meet bottom edge of pan. Glue.
Drip a bloop of glue down into the inside of the very "point" of the handle, to seal it so it won't leak.
Measure, Mark, and Bend
![1.JPG](/proxy/?url=https://content.instructables.com/FOO/1MB3/I9NE4BK8/FOO1MB3I9NE4BK8.jpg&filename=1.JPG)
![2.JPG](/proxy/?url=https://content.instructables.com/FPN/S12A/I9NE4BNB/FPNS12AI9NE4BNB.jpg&filename=2.JPG)
![3.JPG](/proxy/?url=https://content.instructables.com/FNM/HJGW/I9NE4BND/FNMHJGWI9NE4BND.jpg&filename=3.JPG)
![4.JPG](/proxy/?url=https://content.instructables.com/F3X/SBUU/I9NE4BQG/F3XSBUUI9NE4BQG.jpg&filename=4.JPG)
![5.JPG](/proxy/?url=https://content.instructables.com/F22/S4E3/I9NE4BQJ/F22S4E3I9NE4BQJ.jpg&filename=5.JPG)
![6.JPG](/proxy/?url=https://content.instructables.com/FRW/QX0Q/I9NE4BTM/FRWQX0QI9NE4BTM.jpg&filename=6.JPG)
![7.JPG](/proxy/?url=https://content.instructables.com/FFH/T4YH/I9NE4BZY/FFHT4YHI9NE4BZY.jpg&filename=7.JPG)
![8.JPG](/proxy/?url=https://content.instructables.com/FYH/I18J/I9NE4BTO/FYHI18JI9NE4BTO.jpg&filename=8.JPG)
![9.JPG](/proxy/?url=https://content.instructables.com/F5A/E1MW/I9NE4BTP/F5AE1MWI9NE4BTP.jpg&filename=9.JPG)
![10.JPG](/proxy/?url=https://content.instructables.com/FSQ/P506/I9NE4BTQ/FSQP506I9NE4BTQ.jpg&filename=10.JPG)
![11.JPG](/proxy/?url=https://content.instructables.com/F5Y/TRJ5/I9NE4BTR/F5YTRJ5I9NE4BTR.jpg&filename=11.JPG)
1. Measure center point on long edge.
2. Measure "a" four times. (= twice on each long edge) 1 3/8"
3. Mark fold lines 1 and 2
4. Fold 1's in, and unfoldish.
5. Fold 2's in. Glue.
6. Measure "b" on both sides 3 1/2"
7. Mark fold lines 3
8. Fold both 3's in. Glue.
9. Fold tips in to meet bottom edge of pan. Glue.
Drip a bloop of glue down into the inside of the very "point" of the handle, to seal it so it won't leak.