Display Stand for Card

這是一個簡單的卡片展示架。

需要使用3mm的木板和雷射切割機來製作。

如果你沒有雷射切割機，也可以找在地的雷射切割廠商來做。

This is a simple display stand for card.

Need to use 3mm wood board and laser cutter to make.

If you do not have a laser cutter, you can also find a local laser cutter manufacturer

請下載DXF檔案，並將檔案放入你的雷射切割機裡面進行切割。

檔案中最大的方形木板可以放上你想要的內容後進行切割。

不同的雷射切割機使用起來不同，在此省略，請依照你的機器來做標準設定

Please download the DXF file and put the file into your laser cutter forcutting.

The largest square plank in the archive can be cut with the content you want.

如果沒有雷射切割，請找印表機，以A4的大小列印此檔案。

將列印的白紙黏在紙板上，用美工刀做切割

If there is no laser machine, please find a printer and print this file in paper of A4 size .

Using Glue make paper on the cardboard and cut with a utility knife.

當切割完成後請照圖片的樣子拼起來。

When the cut is finished, please put it together like the picture.

現在你已經完成了這個作品。

可以放名片、明信片和任何你想要放的板子，只要厚度在3mm以下。

Now you have completed this work.
You can put business cards, postcards and any board you want, as long as it is less than 3mm thick.