Disc Golf Marker Bag

by grubbkn in Outside > Sports

3319 Views, 7 Favorites, 0 Comments

Disc Golf Marker Bag

15, 8:39 PM.jpg
15, 8:39 PM.jpg
Something I really enjoy doing in my spare time is playing disc golf. However just like any sport you can really sink some money into your discs, mini discs, bag, and other accessories. One accessory I had been wanting was a pouch for my mini disc that I could clip onto the belt loop of my pants. To go to the store and buy one was $20 and to me a pouch the size of your hand should not cost that much. So I decided to make my own out of supplies that I already had at my house.

What You Will Need:
-Scissors
-Lighter
-Some kind of clip
-Tape
-Mini Disc
-8ft Paracord


I made this for a disc golf mini disc but you could make a pouch this size for many things. I also plan in the future to supersize my design to fit around 5 full size disc golf disc.

Step 1

15, 8:39 PM.jpg
15, 8:39 PM.jpg
Take your eight feet of paracord and cut it in half. After that you will want to take the two pieces and together tie a knot right in the middle of your two pieces of paracord.

Step 2

15, 8:39 PM.jpg
15, 8:39 PM.jpg
You now want to take your mini disc and tie two more knots on both sides of the center knot that is as long as your mini disc.

Step 3

15, 8:39 PM.jpg
15, 8:39 PM.jpg
15, 8:39 PM.jpg
Next you want to take your four strands that are hanging and tie it in between the center knot and the knot that is closest to the strand.

Step 4

15, 8:39 PM.jpg
15, 8:39 PM.jpg
15, 8:39 PM.jpg
Now you will want to take your mini disc and put it in the middle like a sandwich. You may want to put a piece of tape at the top to keep it in place while making your final knots. After you have done that take the strands of paracord that are closest to each other and make a knot. You are going to do this on both sides. Now just take your two strands fold them up and make yet another basic knot. Once again you will do this on both sides.

Step 5

15, 8:39 PM.jpg
15, 8:39 PM.jpg
15, 8:39 PM.jpg
Time to add the clip. After your last knots you are going to be left with a short strand and a long stand on both sides. You want to take your two long strands and make a knot then put your clip on and make another knot.

Final Step

15, 8:39 PM.jpg
All that is left to do now is to cut the extra paracord and to use a lighter to melt it so that it does not fray and come apart.

I hope that everyone has enjoyed my tutorial especially since this is the first one I have done. Thanks :)