Diamond Box

by sasikumarahilan6607 in Workshop > 3D Printing

115 Views, 0 Favorites, 0 Comments

Diamond Box

Screenshot 2022-12-01 10.55.20 AM.png
Screenshot 2022-12-01 10.43.36 AM.png

This is a diamond that is in a box. It is a precious diamond that is securely held in a box. The diamond can be taken out to be put on a ring or inside the box as decoration.

Step One Is Making the Diamond That Goes in the Middle of the Box

Screenshot 2022-12-01 10.45.02 AM.png

This is the hardest part of the project, making the diamond. Making the diamond takes more than 20 steps. Another copy of the diamond can be found on the internet if you want to make one.

Step 2 Is Making One Half of the Box

Screenshot 2022-12-01 10.45.31 AM.png

Step 3 Is Making the Upper Half of the Box

Screenshot 2022-12-01 10.45.52 AM.png

Step 4 Is Making the Long Nail That Goes Through the Holes in the Boxes

Screenshot 2022-12-01 10.46.16 AM.png

Step 5 Is Making a Bolt That Will Lock Onto the Nail So That It Doesn't Pop Off

Screenshot 2022-12-01 10.47.10 AM.png