Desktop Water Fountain

by kinte ryder in Living > Beauty

15589 Views, 129 Favorites, 0 Comments

Desktop Water Fountain

565656.png
DSC02414.JPG
Desktop Water Fountain!

Hello Guys this time. I thought if could bring a desktop project. So here it is A DESKTOP WATER FOUNTAIN!.

There are only some easy steps to make it lets do it!

Things You Need :-

DSC02224.JPG
DSC02232.JPG
DSC02238.JPG
DSC02240.JPG
DSC02242.JPG
DSC02244.JPG

Here are the things you will need in this project.

  1. Oxygen Pipe (About 6 cm).
  2. A mini electric Water Pump.
  3. Two Plastic Containers(One larger and one smaller).
  4. 9v Battery.
  5. 9v Battery Holder.
  6. A LED Strip( I use Blue Colour)
  7. A switch.
  8. Hot Glue gun.
  9. Paper cutter.

Cut the Pipe

DSC02246.JPG
DSC02247.JPG

Now the first step is to cut the oxygen pipe using a paper cutter as shown in the figure.And bend it.

Now Glue It!

DSC02251.JPG
DSC02260.JPG

Now you want to hot glue the bend cutted part as shown in the figure.

Make Holes!

DSC02264.JPG
DSC02270.JPG

Now make holes as shown in the figure.

Keep the Way!

DSC02273.JPG
DSC02280.JPG
DSC02286.JPG
DSC02289.JPG

Now keep the way as shown in the figure. And hot glue as shown.

Connect + Hot Glue

DSC02290.JPG
DSC02292.JPG
DSC02303.JPG
DSC02304.JPG

Now its time to connect the water pump. Connect it as shown and hot glue it as shown.

Again Holes!

DSC02321.JPG
DSC02325.JPG

Now again make holes in the lid of the plastic container and the middle of the container as shown.

Simple Schematic and Done!

Capture.PNG
DSC02332.JPG
DSC02341.JPG
DSC02414.JPG

Now observe the simple schematic carefully make connections to the LED Strip.And add water you can always control the water level by add more or less water.

AND DONE!

I wish you a good luck making your own DESKTOP WATER FOUNTAIN and Please DON'T FORGOT TO VOTE IN THE MAKE IT MOVE CONTEST.

:D:D:D:D:D:DD:D:D:D:D:D:D Have a nice Day :D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D:D: