Desktop Aeroplane

Hello everyone, i am Niko, part of RoboSap team, and today i will show you how to make simple desktop plane. It is 3D printed model of plane that fly in front of your fan or any device which blows the air.

It is very light and that therefore very cheap. It takes about 25 min to print it and 5 minutes to assemble it.

- 3D Printed parts

• Part 1 (1)
• Part 2 (2)
• Part 3 (1)
• Part 3 (1)

- 60 cm of Fishing line (OR thread)

Attach Part 1 on main wing.

Add part 1 next to part 2.

Add Part 2 on wing, so Part 1 is in the middle.

Attach back wing on body of plane.

Sort out the Main parts as you can see on picture.

If parts wont stay together, you can glue them.

Cut 2 pieces of thread (30 cm) and wire it on plane (wire it on middle and on one of the main wings side).

Make one, paste the picture of it in comets, and show us your colour combination.