Desk Tidy
This Desk tidy is made of two separate 3D printed components and polypropylene. For this project you will need access to a 3D printer, polypropylene, a Stanley knife, chisel and sand paper to refine the 3D printed components.
Download and Print STL Files
When printing make sure to select the option to print using supports.
Refine 3D Printed Parts and Remove Supports
Use a chiesel to remove the supports. Then use sand paper to smooth any rough edges or corners.
Cut the Polypropylene
Cut 9 lengths of Polypropylene using a Stanley knife, cutting mat and steel ruler.
- 3× 265mm×35mm For horizontal lengths
- 6×105mm×30mm For vertical lengths
Slot Vertical Lengths of Polypropylene Into the Base
Make sure all lengths are equally spaced and straight.
Place Top on the Vertical Lengths of Polypropylene
Make sure to insert one piece at a time.
Weave Horizontal Strips In-between Vertical Strips
Leave beginning and end of the strips on the inside of the desk tidy for a cleaner finish.