Design Origami Bryant
To start off get a square piece of paper with at least one side colored. If only one is colored like regular origami paper, start with the white side up
Fold the Paper in Half
Unfold
Fold in Half
This time it should be horizontally, if the last fold was vertical, vice versa
Unfold
Fold the Edge to the Middle Fold
Flip the Paper Over
Fold the Side to the Middle Line As Shown
If you dont see a bit of white in the corner, you have done this wrong.
Fold the Other Side to Meet at the Middle
Flip Over
Fold the Side to the Middle Line
Do It on the Other Side Too
Fold the Top Corner in
Do It on the Other Side
Fold It in Half
To do this take the pink point and put it overlapping with the other pink point
Flatten It
Fold in the Corner
Fold in the Opposite Corner
Fold the Top Bits to the Line
Unfold to From the Left to the Right
Open the Pocket and Put the Point In
There is a pocket at the top in this picture. Take the bottom point and fit it into the upper pocket.
Fit It Fully Inside the Pocket
Flip It Over and You're Finished!
