Denim Bike Patch Bag

by ZAProwsdower in Outside > Bikes

965 Views, 4 Favorites, 0 Comments

Denim Bike Patch Bag

DSC_0820.JPG
This is an extremely simple way to keep you patch kit snug in place. It is basically a pocket and a flap measured to specifications.

Place Your Patch Kit on the Denim

2.jpg
Place your kit on the denim and determine the amount of denim you need plus about 1/4" of space for sewing. Cut the denim out and use that as a template to cut the other side.

Place the Denim Together

3.jpg
Place the two pieces together. Make sure they are placed with the inside part of denim on the outside. Sew together the two sides 1/4" in on the three sides. The top is left open.

Flip Inside Out

5.jpg
After you have sewn the two pieces together, flip it inside out and you have your pocket.

Make the Flap

6.jpg
7.jpg
Take another piece of denim that is twice the height of the pocket you just made. It should be twice the height and the same width. Fold the strip in half with the inside part of the denim out. Sew the denim in the same way as the pocket except only sew one side together so it makes a half pocket.

Sew the Two Together

DSC_0810.JPG
DSC_0816.JPG
DSC_0817.JPG
DSC_0818.JPG
I sewed my bag with the flap being 7/8" higher than the pocket. I sewed the flap on the open side straight through the side of the pocket to the other side. I sew this about 1/2 way up so there is free movement to open and close the flap.

Add Patch Kit

52e04eb1dbf3ecf0f50000fe.jpg
DSC_0812.JPG
Now just add all the stuff you measured the bag to fit.