Decking on Top of Pallets
![2016, 17:54.jpg](/proxy/?url=https://content.instructables.com/F4P/J8JA/IQYT0Q99/F4PJ8JAIQYT0Q99.jpg&filename=2016, 17:54.jpg)
Levelling
![2016, 17:33.jpg](/proxy/?url=https://content.instructables.com/F38/DPTO/IQYT0N6Q/F38DPTOIQYT0N6Q.jpg&filename=2016, 17:33.jpg)
![2016, 17:35.jpg](/proxy/?url=https://content.instructables.com/F1F/XA65/IQYT0NQC/F1FXA65IQYT0NQC.jpg&filename=2016, 17:35.jpg)
![2016, 17:35.jpg](/proxy/?url=https://content.instructables.com/FWU/J2YM/IQYT0NT9/FWUJ2YMIQYT0NT9.jpg&filename=2016, 17:35.jpg)
![2016, 17:33.jpg](/proxy/?url=https://content.instructables.com/F6A/JNXD/IQYT0N6X/F6AJNXDIQYT0N6X.jpg&filename=2016, 17:33.jpg)
![2016, 17:33.jpg](/proxy/?url=https://content.instructables.com/FHI/XKKL/IQYT0N70/FHIXKKLIQYT0N70.jpg&filename=2016, 17:33.jpg)
1st off all i measured up the size off patio i was going to deck and worked out that for my size 8 euro pallets (1.2 x 0.8) fitted great. I called in to a warehouse and got 9 for free. Extra pallet for step. I worked out i needed 18 lengths of decking. I then started to level out the pallets. I used broken bits off paving flags and roof tiles for leveling. After i was happy with the position of pallets i used some bits of 4x2's to braze each pallet together.
Start Decking
![2016, 17:33.jpg](/proxy/?url=https://content.instructables.com/FFV/MUZC/IQYT0NL0/FFVMUZCIQYT0NL0.jpg&filename=2016, 17:33.jpg)
![2016, 17:33.jpg](/proxy/?url=https://content.instructables.com/FUJ/2Q0J/IQYT0N73/FUJ2Q0JIQYT0N73.jpg&filename=2016, 17:33.jpg)
![2016, 17:33.jpg](/proxy/?url=https://content.instructables.com/FRN/K7KW/IQYT0NNN/FRNK7KWIQYT0NNN.jpg&filename=2016, 17:33.jpg)
![2016, 17:36.jpg](/proxy/?url=https://content.instructables.com/FYU/RO7Y/IQYT0NUQ/FYURO7YIQYT0NUQ.jpg&filename=2016, 17:36.jpg)
I put the front length on 1st then the right hand side on to finish the coner off.
After that i lay length after length down and used a thick screwdriver to keep a nice gap between the deck.
I used 2" deck screws to secure the wood
After that i lay length after length down and used a thick screwdriver to keep a nice gap between the deck.
I used 2" deck screws to secure the wood
Step
![2016, 17:54.jpg](/proxy/?url=https://content.instructables.com/FOO/IHNC/IQYT0Q98/FOOIHNCIQYT0Q98.jpg&filename=2016, 17:54.jpg)
![2016, 17:54.jpg](/proxy/?url=https://content.instructables.com/FIK/F0A9/IQYT0QJ8/FIKF0A9IQYT0QJ8.jpg&filename=2016, 17:54.jpg)
I cut the left over pallet in half and decked around it to make a step into the caravan
Little Fence
![2016, 17:54.jpg](/proxy/?url=https://content.instructables.com/FZJ/O6BN/IQYT0QIA/FZJO6BNIQYT0QIA.jpg&filename=2016, 17:54.jpg)
![2016, 17:55.jpg](/proxy/?url=https://content.instructables.com/FAT/D0QL/IQYT0QJA/FATD0QLIQYT0QJA.jpg&filename=2016, 17:55.jpg)
We have an ugly bank at the end of our patio so i made a little fence to hide it and filled behind it with soil
Few Flowers
![2016, 17:55.jpg](/proxy/?url=https://content.instructables.com/FLF/7CEG/IQYT0QJB/FLF7CEGIQYT0QJB.jpg&filename=2016, 17:55.jpg)
![2016, 17:54.jpg](/proxy/?url=https://content.instructables.com/FDR/6V3H/IQYT0Q9D/FDR6V3HIQYT0Q9D.jpg&filename=2016, 17:54.jpg)
![2016, 17:54.jpg](/proxy/?url=https://content.instructables.com/FCB/UD62/IQYT0Q9F/FCBUD62IQYT0Q9F.jpg&filename=2016, 17:54.jpg)
I planted a few flowers around the edge and we are almost done. Just got to leave it to dry out and paint a nice oil over it for protection. All in it cost £190 for the decking and screws and took around 7hrs start to finish.