Decision Making Phone Bag

This is how to make a decision-making phone bag using the Adafruit Circuit Playground (CPX)

Supplies needed:

1.Buttons(optional, just to decorate)

2.Any color of string and a needle

3.The CPX

4.Battery pack

5.Three batteries

I used a glove for the bag and cut out the middle part. I used a sewing machine to sew one of the opened sides so the phone could go in the bag. With the remaining part of the glove, I cut a little pocket and used a sewing machine to sew one of the opened sides so the battery pack had a place to stay. When stitching the pocket, exercise caution to avoid piercing through the rear side, as this could result in the sides being joined together and preventing your phone from fitting in properly.

Cut a long piece of cloth or any material you want to make the strap with. Fold it in half and start stitching the strap.

Stitch the CPX on the same side where your battery pack pocket is. Make sure you stitch through every hole.

This is the code I made in "Adafruit circuit express make code." Since its a decision making device I used the ring to represent the colors red, yellow, and green which symbols shouldn't, maybe, and should. I used the sensing tool so if I shake my bag, the ring can start circulating and choose one of the three colors.

here is the video of it working