Dash [Knex Slingshot]

Here are the instructions for my singleshot slingshot.

Video: https://www.instructables.com/id/Dash-Knex-Slinghot/

1: Make this.
2-3: Add grey/black and blue rods.

Add the second layer. I recommend connecting all the connectors to the rods and then adding in the rods. It will make it much easier.

Add all the parts to the third layer.

Add the 4th Layer. Make sure you add the trigger guard and the green rods in the handle.

Add the 5th layer.

1: Make this.
2: Attach it here.
3: Add this white rod here.
4: Make these.
5: Attach them to the other thing you made.
6: Make this.
7: Add it to the rest of the trigger
8: Make this.
9: Add it like in the picture.
10: Add a rubber band here.
11: Add a rubber band here.
12: Add this rubber band to the trigger part inside the gun (I used a toothpick and wrapped the rubber band around it to get it through the gun).

1: Add 9 orange connectors to each side.
2: Add one blue spacer to each side of each grey/black rod.
3: Add your rubber bands. The bottom rubber bands are to make the bow bend less but they don't actually work so you can leave them off.
4: Add two more orange connectors to each side of the bow.