Dad's Samsung Note 9 Cover

My father's phone cover was corrupted so I thought I could make a 3d cover design for his Samsung Note 9 phone and give it to him as a gift after printing.

This design was made using: Tinker cad 3d Design Code blocks.

Hope you like it!

Fist I brought a box, then I set the edge and edge steps to 100, and I set the height to 80.

I moved it to X=0, Y=0, Z=40.

Next I duplicated the box and changed the dimensions to width=5, length=35, height=75, edge=0, edge steps= 10.

Then I moved it to X=2, Y=2, Z=40.

I made a box and set its edge to 0.5 and edge steps to 15. Its dimensions are width=15, length=20, height=7.

I moved it to X=0, Y=0, Z=65.

I duplicated it and changed its dimensions to make a bigger rectangle above it. The dimensions of the duplicate are width=25, length=25, height=8.

I moved it to X=0, Y=0, Z=70.

I made a new box and set its dimensions to width=40, length=0.5, height=80, edge=100, edge steps=100.

I moved it to X=22, Y=18, Z=40.

Then I made a new box and set its dimensions to width=3.5, length=3.5, height=10, edge=100, edge steps=100.

I moved it to X=1, Y=10, Z=0.

I made another box with the following dimensions width=3.5, length=7.5, height=10, edge=100, edge steps=10.

I moved it to X=1, Y= -2, Z=0.

Next I made a new box and set its dimensions to width=4.3, length=2, height=10, edge=100, edge steps= 100.

I copied it 3 times, and put them beside each other as shown in the pictures.

Finally I created group to empty all the shapes that we put into the cover base.