DVD Holder Carousel

In this instructable you will be making a DVD Holder Carousel.

You will need:

- Used DVD Holder,

- Electric drill,

- Hole cutter,

- Metal wire (1.5 mm thickness),

- Pliers,

- Wire stripper, used to cut the metal wire (optional),

- pencil,

- and ruler.

Use pencil and then hole cutter to mark eight holes equally spaced around the DVD carousel.

Use drill to make eight holes in the old DVD holder.

Use ruler and pliers to cut eight 20 cm metal wire pieces. 20 cm is about 8 inches.

Insert wire pieces into the old DVD holder holes and spin the metal wire ends around the wire as shown in the photo with pliers.

Use pliers to spin on wind the wire pieces.