DIY Phone Stand - Made on Board Flight
by dinesh kumar c in Circuits > Mobile
11897 Views, 115 Favorites, 0 Comments
DIY Phone Stand - Made on Board Flight
![j.JPG](/proxy/?url=https://content.instructables.com/FYS/6NMH/HZMJ7ORR/FYS6NMHHZMJ7ORR.jpg&filename=j.JPG)
![0.jpg](/proxy/?url=https://content.instructables.com/FP6/4WV0/HZMJ7O59/FP64WV0HZMJ7O59.jpg&filename=0.jpg)
Not always are you offered with awesome in-flight entertainment. You'd rather want to watch something from your phone and watch it hands-free.
Here is an instructable that helps you with the hands-free part.
First of all, The resources at your disposal are limited. The scissors, lights, matchbox, swiss-knife and shotgun would have been dumped at the security check point. So, lets make the most of what is available.
Air Sickness Bag & Cup of Water
![a.jpg](/proxy/?url=https://content.instructables.com/FVK/LH1E/HZMJ7OC6/FVKLH1EHZMJ7OC6.jpg&filename=a.jpg)
Fish into the seat pocket for the Air Sickness Bag. Look for it frantically in case you want to freak you co-passenger.
Ask for a cup of water from the cabin attendant and gulp it down.
Draw a Circle
![b.jpg](/proxy/?url=https://content.instructables.com/FG6/L4E3/HZMJ7OF2/FG6L4E3HZMJ7OF2.jpg&filename=b.jpg)
![c.jpg](/proxy/?url=https://content.instructables.com/F7I/UTDS/HZMJ7OLD/F7IUTDSHZMJ7OLD.jpg&filename=c.jpg)
Draw a circle with the cup's rim on the top end of the paper. Don't expect your co-passenger to lend a pen. Toying around with Air Sickness Bag means you are on your own.
Tear Out the Circle
![da.jpg](/proxy/?url=https://content.instructables.com/FN7/E4AY/HZNYJZ3F/FN7E4AYHZNYJZ3F.jpg&filename=da.jpg)
![e.jpg](/proxy/?url=https://content.instructables.com/FK7/1W5E/HZMJ7OOU/FK71W5EHZMJ7OOU.jpg&filename=e.jpg)
Fold the paper along the circle diametre and tear out a circle that's about 3mm less in dia, large enough for the cup to pass through the hole.
Insert the Cup
![f.JPG](/proxy/?url=https://content.instructables.com/F78/3BVW/HZMJ7OPC/F783BVWHZMJ7OPC.jpg&filename=f.JPG)
Insert the cup through the hole and ensure the rim does not pass through.
'M' Shaped Fold
![g.jpg](/proxy/?url=https://content.instructables.com/FF5/FI04/HZMJ7OQ9/FF5FI04HZMJ7OQ9.jpg&filename=g.jpg)
![h.jpg](/proxy/?url=https://content.instructables.com/FIT/CVLJ/HZMJ7OQZ/FITCVLJHZMJ7OQZ.jpg&filename=h.jpg)
Make an 'M' shaped fold about 3cm from the cup. Fold the last flap backwards.
Place the Phone Between the Ridge and the Cup
![i.JPG](/proxy/?url=https://content.instructables.com/FVO/DLEV/HZMJ7NTK/FVODLEVHZMJ7NTK.jpg&filename=i.JPG)
You have yourself a phone stand made completely with materials on board.
Watch Your Favourite Show
![l.jpg](/proxy/?url=https://content.instructables.com/FUV/V6Y0/HZMJ7OV1/FUVV6Y0HZMJ7OV1.jpg&filename=l.jpg)
Also look for the relief on the co-passenger's face.