DIY Workbench Vise
.jpeg)
.jpeg)
I tried to make a simple wooden visa for my workbench.
Supplies
.jpeg)
I used :
- Two simple blocks of wood.
- Two Metal screw bars
- Two nuts.
- A Drill.
- Sander.
- Wood stain.
Drill 1st Piece of Wood
.jpeg)
.jpeg)
.jpeg)
- I brought 2 pieces of used wood.
- Two holes were drill in one of the pieces to cross the two columns through which they were screwed.
Drill 2nd Piece of Wood
.jpeg)
.jpeg)
.jpeg)
.jpeg)
- A cavity was made in the other piece at the same level to place the two nuts in it
- The back piece is fixed with another piece of wood to form a base for fixing to the table
Stain the Wood
- Sand the wood before stained with a dark colour
Fix on Bench
.jpeg)
.jpeg)
I fix it on my bench and try it ... it is OK
Need your opinion.