DIY Wooden Shelves
![5.png](/proxy/?url=https://content.instructables.com/F9E/1CPK/LV3TOSZ6/F9E1CPKLV3TOSZ6.png&filename=5.png)
Two wooden shelves that can be mounted onto the wall. These shelves were made out of one pallet.
Supplies
All you need is a single pallet. As well as a hammer and nails/screws.
Dissasemble
The first step it to take of 3 of the boards on the pallet. Can not be the two boards on the ends.
Cut
Then you want to cut the pallet into thirds.
Bottom
![2.png](/proxy/?url=https://content.instructables.com/FQX/X365/LV3TOSUW/FQXX365LV3TOSUW.png&filename=2.png)
After cutting it into thirds you need to nail two of the boards to the ends of the pallent. This will be the bottom of the shelf.
Split
![1.png](/proxy/?url=https://content.instructables.com/FYS/V7XF/LV3TOSVC/FYSV7XFLV3TOSVC.png&filename=1.png)
With the remaining pallet, cut it in half long ways and nail it to top of the shelf.
Optional
![8.png](/proxy/?url=https://content.instructables.com/F6J/1AI8/LV3TOSWA/F6J1AI8LV3TOSWA.png&filename=8.png)
![6.png](/proxy/?url=https://content.instructables.com/F1E/KN3K/LV3TOSWU/F1EKN3KLV3TOSWU.png&filename=6.png)
With the remaining wood of the pallet make 4 5x5 blocks and cut and indent into these. As well as 4 3x3 blocks and cut these into an L shape the same size as the indent, that will slide into the other 4 blocks you cut. Mount the L shaped ones to the shelves and mount the other ones onto the wall evely so you can put the shelves on the wall.