DIY Wooden Photo Frame

Had some spare time this weekend and a bit of wish to impress my partner. So went ahead and created these pallet photo frames to flash some of my magic on her..

One of my mate gave me these pallet planks from their broken bed, which I am going to use in making the photo frames.

Other than that, for this project we need:

Pallet Wood

Protective equipment like:

Nails

Face mask : https://amzn.to/3GRx4n9

Glasses : https://amzn.to/3FRUwiE

Gloves : https://amzn.to/3Altb7s

Sanding Tool : https://amzn.to/3423NHX

Hammer : https://amzn.to/3Is4Bob

Measuring Tape : https://amzn.to/3ItGHJa

Handsaw or Chop-saw : https://amzn.to/3H4QhSc

Knife : https://amzn.to/3fMjRjo

Pliers : https://amzn.to/33EmOQN

Pencil : https://amzn.to/3KCdQE8

and Paint of your choice : https://amzn.to/33z5ug9

VELCRO Removable Picture Hangers : https://amzn.to/3fLrGpN

Since the pallet planks are very well sanded and polished, I did not had to waste my time in sanding an polishing them.

I wanted to keep the size of my frames pretty standard so I cut them into 14"x19" blocks.

Using a chop-saw I cut 45degree angels on both sides of the plank.

Using wood-glue, I am joining all the pieces that I extracted from the pallet planks in the previous step. I added a bit of masking tape to hold the pieces together until they completely dry up.

On my way back from work, I found these amazing pieces of art lying along the roadside. Things like these, really fascinate me.

I painted one of them black and another one brown. Then, using hot-glue I attached them to the base pallet plank. I also glued an artificial flower pot, which I bought from a nearby local shop for $5.  

To hang the frame, I am going to use "VELCRO Removable Picture Hangers". By using these, I don't have to drill any hole in the wall, and if the setup doesn't look good here, I can just pull it out and paste it somewhere else in the house. 

So, this how my final setup looks like. Do comment and let me know if there is any scope of improvement.

Thanks again for checking my post. I hope it helps you.

If you want to support me subscribe to my YouTube Channel: https://www.youtube.com/user/tarantula3

Blog Posts: http://diy-projects4u.blogspot.com/2022/01/diy-wooden-photo-frame.html

Video: https://youtu.be/7dygDmDOhgY

Chop Saw: https://amzn.to/3H4QhSc

VELCRO Removable Picture Hangers: https://amzn.to/3fLrGpN

Support My Work:

BTC: 1M1PdxVxSTPLoMK91XnvEPksVuAa4J4dDp

LTC: LedWPdTaUzr5iaJx8garkcykSs1DZU1FAx

DOGE: DQoaLEn7aWpcwt8ZpyWfiBXzw7XM6Ksv2x

ETH: 0xB62a901Ee6cE24f3153CA6ae565C2A6533066faA

BAT: 0xB62a901Ee6cE24f3153CA6ae565C2A6533066faA

LBC: bZ8ANEJFsd2MNFfpoxBhtFNPboh7PmD7M2

Thanks, ca again in my next tutorial.