DIY Water Pump or Valve Auto ON-OFF | Make Water Level Controller at Home

Hello friends, in this video I will show you Very Simple and Amazing Project. It really simple and easy to make it at your home. DIY Water Pump or Valve Auto ON-OFF | Make Water Level Controller at Home. Order this project from PCBWay - http://bit.ly/2kxA4QD

Get 10 PCBs for Only $5! PCBWay - https://www.pcbway.com

Required Hardware for this project:

Water Pump 12V - http://bit.ly/2m0IksI

Solenoid Valve 12V - http://bit.ly/2kxCfUc

Relay 12V - http://bit.ly/2kA70b4

Diode 4007 - http://bit.ly/2k9HWHY

Transistor BC547 - http://bit.ly/2kpeZbd

Resistor 1K - http://bit.ly/2lJhi8Z

Adapter 12V - http://bit.ly/2m2GCHj

Battery Connector - http://bit.ly/2lEhoPk

Wires - http://bit.ly/2kAu9dF

Wire Connector - http://bit.ly/2lEgy58

Tube Hose - http://bit.ly/2k5qnbU

Soldering Tool Kit - http://bit.ly/2D6YbuC

Four Arms Soldering Station - http://bit.ly/2kygjsc

Banggood 13th Anniversary Sale - http://bit.ly/2kmNIpP

In this project, I have choosen PCBWay. PCBWay is the only way to make this project happen a very low cost and high quality.

Order this project from PCBWay - http://bit.ly/2kxA4QD