DIY - Waste Oil Burner

This oil burner is designed to run with my foundry however it is easy to modify to suit any purpose including space heating and forging. Mine runs on waste motor oil but vegetable oil would also work. The burner outputs well over 1000 degrees Celsius so care should obviously be taken during use.

I also go over the oil burner in my aluminium casting video.

Tools

Angle grinder (and/ or plasma cutter)

A welder TIG/MIG/ARC (MIG recommended)

Power drill or drill press for drilling hole (size of the oil pipe)

Materials

Cheap leaf blower (variable power connected to control the air output)

Large container with lid and nozzle (to hold the oil)

copper tube for oil inlet

Empty 40kg Gas Tank or other cylinder (fire extinguisher)

round or square tube same size as blower outlet

Curved pipe for flame outlet

Oil (motor or vegetable oil)

All steps are in my video: 1 Week Builds Ep- 4 - Oil Burner

Subscribe to my youtube channel DIY Jet Engine Guy for weekly DIY videos