DIY Vanity Mirror in Easy Steps (using LED Strip Lights)
by Harman1796 in Circuits > LEDs
1981 Views, 3 Favorites, 0 Comments
DIY Vanity Mirror in Easy Steps (using LED Strip Lights)
In this post, I made a DIY Vanity Mirror with the help of the LED strips. It's really cool and you must try them as well.
Supplies
- Mirror
- Hot glue gun
- White/RGB LED Strip
- Wires
- Female DC Jack
- Soldering Iron
- 12 V DC Adapter
Procedure
- First all you have to get a mirror (any shape), clean its frames and glass with the help of isopropyl alcohol.
- Now, using a white LED strip (You can even use RGB LED strip as well, depending on your taste, I'm using white as I need just for dressing purposes.), stick it to the frame of the mirror you are using.
- Keep them continuous, in case of any irregular shapes of mirror.
- Use a soldering iron to solder the connections carefully and perfectly.
Procedure (Contd.)
- Solder the DC Female jack to the points of the LED strip.
- Secure each and every connection with the help of a hot glue gun.
- Now barely anything is left, fix up everything and it is ready to go.
- Connect the DC adapter and it will light up.
Finally Done!
And this project is done, believe me, it is this much easy and effective as well. Check out the bottom pictures for the final product.