DIY Tutorial - How to Made the Leaf Necklace With Pure Copper!?☺

Tools and Materials:

• Pure copper
• Lighter
• Scissors
• Texture hammer
• Copper wire
• water
• Marker Pen
• Tape
• Hammer
• Tableting machine ect.

Trimming: Use scissors to trim a square-shape piece from the brass.

Draw on the brass piece with a marker to draw out the shape of a leaf. According to the outlines of the leaf, trim off the shape with scissors.

Heat up the brass leaf to soften it. When you see it turn from red to dark, cool it down with cold water.

Use a press-machine to lengthen the softened brass piece.

After pressing, the brass leaf will be trimmed.

Shaping step. Trim off a section of brass wire and use tape-paper to stick the brass wire and the brass leaf together.

The taped together brass piece and wire will be pressed by the table pressing machine.

The tape-paper of the pressed brass piece will be taken off and we will see a press-line in the middle of the brass piece.

Use tweezers to fold up the brass piece following the middle press-line.

The folded brass leaves will be hammered by a texture hammer and we will make the outlines of leaf’s vein by this process.

Heat up the brass leaf and cool it down.

Use tools to re-open the folded leaf and make it with a shape of opened. Also we could make different folds with our interest.

Punch a hole on the surface of the leaf with tools.

Polish the brass leaf and make the incision become smooth.

It's a DIY Tutorial for Making the Leaf Necklace with Pure Copper!! Hope you will like it!

Follow us on Instagram or Facebook, you can know more details about us!

• Facebook: HappyJewelrySupplies
• Instagram: HappyJewelrySupplies

Our Website + Etsy online shop:

• www.happyjewelrysupplies.com
• www.etsy.com/hk-en/shop/happysupplies