DIY Tutorial - How to Made Two-Way Wearing Bracelet of Ripple Sterling Silver

Tools and Materials:

• Sterling silver
• Marker Pen
• water
• hammer
• Scissors
• Lighter

First, we use cotton thread to measure the required length of the silver piece. According to the length we measured, we will trim a section of the silver.

With the trimmed silver piece, we will bend and fold its head to the tail.

Heat up the silver piece to soften it and place it into cold water to cool it down. We will use it latter.

Fix the shape of the silver with tools like tweezers and so on, as the image shows.

Now we will place the shaped silver into the pressing table machine. We will flatten and lengthen the silver so as to keep the shape of it.

Use scissors to trim off the unnecessary parts of the silver and remember to polish the incision of it to be smooth.

Use tools to hold the two ends of the silver and make them paralleled together. Add welding powder between the two ends and heat them up to weld them together, as the image shows.

The heated silver will be cooled down by cold water.

The cooled down silver will be held up with tools again. Now we will continue to weld up the silver piece so the silver will turn from single line to double lines.

The heated silver will be cooled down by cold water. It will be used in the next few steps.

The welded silver will be polished by tools and cleaned off its black dirt.

Through hammering, twitching and bending, we will make the silver to achieve the embryonic form of a bracelet.

In this design of ours, the other end of the bracelet has a whirlpool-shape button. Now in this step we will make this button. According to the size of the bracelet, we will trim and get a round piece of silver. Polish it and save it for the next step.

Use texture hammer of water ripple to make textures on the surface of the round silver piece. Now it is time to use the mold. With this mold, we will make the round silver into a shape of sunken. Next, we trim a hole on the surface of the round silver and make it into the shape of a whirlpool.

Heat up the silver completely and it will achieve silver- pearl naturally. Weld the silver-pearl to the center of the whirlpool.

Weld the whirlpool button to the bracelet and cool it down.

The welded bracelet will be placed into the mold. Now we will hammer the bracelet with a soft hammer to make it round. Next, hammer it with a ripple texture hammer to achieve texture on its surface. The bracelet will obtain different ripples naturally.

Place the bracelet into the polishing machine to clean and polish it well. The original charming color of the silver will show up.

It's a DIY Tutorial for Making Two-Way Wearing Bracelet Of Ripple Sterling Silver! Hope you will like it!

Follow us on Instagram or Facebook, you can know more details about us!

Facebook: HappyJewelrySupplies
Instagram: HappyJewelrySupplies
Our Website: www.happyjewelrysupplies.com