DIY Star Wars LightSaber ( Bi-Colored )

Hello guys and welcome to our another instructable.

Today we are going to make DIY Star Wars LightSaber.

So let's start making this awesome light saber.

Watch the video for detailed instructions on how to make the Star Wars DIY LightSaber with all required components and extra information.

And may the force be with you but you may still need the materials.

So you may need the following materials/tools for making this uber cool light saber.

• Led strips(of any 2 color)
• Hobby Knife
• Cardboard roll
• Sticky Tape
• 9v Battery and Battery Snap
• Acryllic colors
• Wires
• Glass Tube
• Scissors
• Some tools(Glue gun,Pliers, Wire cutter, Soldering iron, etc.)

So let's get started...

Remove the backing of the led strips and stick them back to back...

Now just solder the wires parallel combination and test them...

Now just insert the led strips in the glass tube and them there with the help of some hot glue...

Also connect the battery snap with the help of soldering machine...

We can also test it...

With the help of hobby knife cut the cardboard tube as shown in the images...

Now stick the tub with the help of some tape...

Note:The diameter of the handle must be 2.5 cm.

Now just use the acrylic paints to paint the handle as of a real star wars light-saber...

Now just put the battery and the battery snap in the handle and glue the glass rod to the handle with the help of glue gun..

This completes your Light Saber...

Oh Yeah!!!

You have got the force with you...

Now you can flaunt on your friends with this amazing saber...

Thanks for watching...

Don't forget to check us on social media...

We are frequent on Facebook and Twitter...

Don't forget to like the video and this ible...

Also you can express your views on this ible and our channel by posting your comments below this step...

We welcome all your support and feedback...

Check back next week for more DIYs!

Be Safe, Enjoy, Happy DIYing and Stay Tuned!☻☺☻☺