DIY Rainbow RGB Led Tree
![DIY Rainbow RGB Led Tree - Best Value 2019](/proxy/?url=https://content.instructables.com/FVF/RCK3/K0YBFC4Q/FVFRCK3K0YBFC4Q.jpg&filename=DIY Rainbow RGB Led Tree - Best Value 2019)
Nice to meet you again. Today I share with you how to make a beautiful night light. Night lights use Rainbow RGB Led to change colors themselves. The light will turn on automatically when it is dark. The necessary components I will list below, wish you success.
Thank you for visiting my YouTube channel. It is great pleasure to meet you. I wish you and your family good health and happiness.
Components Needed
1. Rainbow RGB Led
https://www.banggood.com/100Pcs-F5-5mm-Slow-Flash-...
2. TP4056 Lithium Battery Charging
https://www.banggood.com/TP4056-Micro-USB-5V-1A-Li...
3. Plastic Shrink
https://www.aliexpress.com/item/32862162269.html?s...
4. MT3608 Booster Power Module
https://www.banggood.com/1pcs-MT3608-2A-DC-DC-Adju...
5. Hot glue, wires, soldering iron
That is all we need. Let's start.
Let's Start
![20190921_155022.mp4_snapshot_00.19.734.jpg](/proxy/?url=https://content.instructables.com/FXR/0ZQA/K0YBFCGT/FXR0ZQAK0YBFCGT.jpg&filename=20190921_155022.mp4_snapshot_00.19.734.jpg)
![20190921_155601.jpg](/proxy/?url=https://content.instructables.com/FZC/P2WJ/K0YBFD04/FZCP2WJK0YBFD04.jpg&filename=20190921_155601.jpg)
![20190921_160606.mp4_snapshot_00.04.000.jpg](/proxy/?url=https://content.instructables.com/F5G/FEOM/K0YBFDD1/F5GFEOMK0YBFDD1.jpg&filename=20190921_160606.mp4_snapshot_00.04.000.jpg)
- I use pre-cut heat shrink sheet. If you can't buy them, cut them to the shape in the clip, not exactly.
- You can also use pet bottles. Each material will have different shrinkage rates. It will take you several times to get used to this.
- I use a hair dryer and it works perfectly. If you have a hot air blower it will help your work faster.
- Pay attention to shape your flowers when heated.
- You can also color them with crayons. Pay attention because the plastic will shrink so you do not need to paint too much.
Step 2
![20190924_111832.mp4_snapshot_00.04.583.jpg](/proxy/?url=https://content.instructables.com/FYH/ZH8I/K0YBFDWW/FYHZH8IK0YBFDWW.jpg&filename=20190924_111832.mp4_snapshot_00.04.583.jpg)
![20190924_113737.jpg](/proxy/?url=https://content.instructables.com/FF6/9NKY/K0YBFE1W/FF69NKYK0YBFE1W.jpg&filename=20190924_113737.jpg)
- After creating petals successfully. We will mount the led on them. I use hot glue gun.
- I wandered in the garden and found a dry twig. This is probably the hardest job. A dry branch that fits your flowerpot is not easy.
- Our flower is complete. It looks pretty cool, right? Let's go to step 3. Add more electricity to make it more sparkling.
![20190924_134200.jpg](/proxy/?url=https://content.instructables.com/FIP/VNU3/K0YBFEHU/FIPVNU3K0YBFEHU.jpg&filename=20190924_134200.jpg)
![20190401_155006.jpg](/proxy/?url=https://content.instructables.com/FQW/5CFS/JU8N2CZG/FQW5CFSJU8N2CZG.jpg&filename=20190401_155006.jpg)
![20190924_165453.jpg](/proxy/?url=https://content.instructables.com/F08/2LLA/K0YBFEWC/F082LLAK0YBFEWC.jpg&filename=20190924_165453.jpg)
![DIY_Rainbow_RGB_Led_Tree_Best_Value_2019.jpg](/proxy/?url=https://content.instructables.com/FVJ/NET1/K0YBFF8Y/FVJNET1K0YBFF8Y.jpg&filename=DIY_Rainbow_RGB_Led_Tree_Best_Value_2019.jpg)
![20190924_172355.jpg](/proxy/?url=https://content.instructables.com/FTV/JGNY/K0YBFFDK/FTVJGNYK0YBFFDK.jpg&filename=20190924_172355.jpg)
![20190924_172825.jpg](/proxy/?url=https://content.instructables.com/F6U/XDIX/K0YBFFJW/F6UXDIXK0YBFFJW.jpg&filename=20190924_172825.jpg)
- I use wires taken from inductor. This cord is quite small, you will not need to hide them. And it also has good quality.
- This is an electrical circuit diagram that lights up automatically when it's dark. Your flowerpot will turn on automatically, you can use it as a night light, that's great.
- The connection part is quite simple: Battery ---> TP4056 ---> MT3608 Booster Power Module ----> Auto light circuit ---> led
Good luck