DIY RGB LED Lamp

I Made LED lamp using Acrylic Glass.

Items we Need

1. Acrylic Glass

2. RGB LED Strips and Controller

3. styrofoam sheet

4. Hot glue, Strong Glue

5. Marker, acrylic cutter, knife, ruler

Need Acrylic Glass Sheet

Cut 3 three Pieces of acrylic glass different sizes or same as you want.

Take a marker and draw some pattern as you want, I draw Circuit board design.

take a knife or something pointed thing for scratch on acrylic glass,

and scratch the pattern that you draw.

after scratch has done, take off plastic wrapper on acrylic glass.

need a Styrofoam sheet for making lamp base,

make a triangle base like this, and cut 3 blocks for glasses .

after making base, paint it.

cut three pieces RGB LED from LED Strips.

Add the LEDs on bottom surface of base

solder LEDs parallelly

make a hole on side of the base and pass through the power outside.

solder a male header on power wires.

now attach glasses on base,

at last, plug power wires into the RGB LED controller and power the controller.

Finally LAMP is Ready for Play.

Light Off your Room and enjoy the Lamp