DIY Quadcopter With 51 MCU C8051F 2212 KV930 Motor German EPP1045
by ICStation in Circuits > Electronics
8063 Views, 37 Favorites, 0 Comments
DIY Quadcopter With 51 MCU C8051F 2212 KV930 Motor German EPP1045
Are you dreaming about DIY a cool quadcopter by yourself one day?Today ICStation Team will share you the making steps with a lot of ultra-clear pictures. The quadcopter we introduce to you uses framework of 51MCU and all modules of system based on C8051F.The rack is made of electric straight liner and tube socket with hard disk slice.The motor uses 2212 KV930. The front and back side of propellers use German EPP1045.
Prepare Two Hard Disk
These are two second-hand hard disk.
Install the Base of Electric Straight Liner
Prepare and Install the Main Parts of Engine Body
Use Desktop Miniature Bench Drill to Process Rack
Use the Original Propeller Protector to Fix These Two EPP1045 Propellers
Weld Banana Pin
Install and Fix the Motor
The Whole Structure of Rack
To Modify the Remote Control FT06-C
Based on the cheap and big size FT06-C, add two ratio channel and LCD to display the relevant parameter.Leave the high frequency control head and replace whole PPM encoding board.
Cutting the Board With the Specialized Knife
Take Down the Original PPM Board of FT06-C
Put the Board in This Place
Add a 5110 LCD in This Place of FT06-C
You could find this 5110LCDthrough the link:http://www.icstation.com/product_info.php?products_id=1444
Weld the PPM Control Board
Successfully Light the LCD
Look the Whole Effect After Adding the LCD
Install the Potentiometer of the Left and Right Side
Wire the LCD and Potentiometer
Look the Two Added Potentiometer
Increase the Height of Potentiometer Knob
Calibration the Central Point of the Rocker in Engineering Mode
Display Valid Values of PPM in Front 6 Channels When Working
The PPM Waveforms of 8 Channel Displaying Through the Receiver
Flight Testing in G3.5
