DIY Puppy Cage
Since our dog is going to have puppies I decided to make a little play box for them. Since this is my first one, it was a little crazy. Hope you enjoy it!
Materials
You will need: 4 pieces of wood about 3 feet long and 1 foot wide And 1 inch thick.
1 piece of wood 4 feet long and 4 feet wide.
An old rug
Nails
Hammer
Pencil
Tape measure
1 piece of wood 4 feet long and 4 feet wide.
An old rug
Nails
Hammer
Pencil
Tape measure
First Piece of Wood
It is easier with two people helping! My sister helped me with this project. If you are wanting to be precise, use the tape measure and pencil to make your straight lines so you know where to put your board. One person will hold one end of the big board and you will slide a smaller board underneath. Hammer it onto the wood. Make sure that no nails stick out!
Putting Other Wood On
Flip the big board around. Put a board on the board so it overlaps a little. Hammer it in. Do with rest of boards.
More Hammering
Now flip it over carefully. Hammer it in so the boards stay on again, do NOT let any nails stick out!!
Rug
Put your rug in it. The rug is for padding for your puppies or kitties.
Done!
I hope you enjoy this wonderful craft! And to my followers, THANKS FOR FOLLOWING ME!