DIY Portable Charger

by VinayakG15 in Circuits > Electronics

3756 Views, 21 Favorites, 0 Comments

DIY Portable Charger

vlcsnap-2017-04-15-13h47m01s336.png
vlcsnap-2017-04-15-13h46m47s806.png

its a pain when your phone battery is low and you have to do some work and there is blackout then how will you charge your phone then you will use this emergency charger which will give a an extended juice for your phone with a 9v battery

so without further lets do this

Tools Needed

vlcsnap-2017-04-15-13h44m48s475.png
vlcsnap-2017-04-15-13h44m45s095.png
vlcsnap-2017-04-15-13h44m43s290.png
vlcsnap-2017-04-15-13h44m39s400.png
vlcsnap-2017-04-15-13h44m52s890.png

7805 ic

micro usb cable

9v battery

9v battery connector

and some basic materials

this is all you needed to do this

it costs around 1 $

thats cheap it is

Heat Up the Soldering Iron

vlcsnap-2017-04-15-13h45m55s306.png
Untitled.png

just cut the usb in hald and connect the each wire as shown above

note before powering your phone with it just take a multi meter and check the voltage it should not excced from 5.2

otherwise your phone may be damage

You Are Already Done

vlcsnap-2017-04-15-13h47m01s336.png
vlcsnap-2017-04-15-13h46m47s806.png

that how easy and simple it is to make a emergency charger

check this out on youtube at

check out our channel at

https://www.youtube.com/channel/UCgdTN9c6dVWrnffGs...

and also check out our page

https://www.facebook.com/techyguy301/

like and share