DIY Planter Box

I built this DIY Planter Box few years back with pressure treated lumber and corrugated steel roof panels on the sides. Over the years we had many different vegetables grown in the planter box. I love how it looks and it holds a lot of dirt for vegetable plants with deep roots. Also, the box is at convenient height for taking care of the plants.

• 2x4x8' (x6)

• 2x6x8' (x3)

• 2 1/2" Pocket Hole Screws

• 2 1/2" Wood Screws

• Corrugated Steel Roof Panels (x4)

Tools for this project
• Drill

• Kreg Jig

• Miter Saw

• Tape Measure

Flip the planter box upside down. Take 2x6 and cut 5 boards to 29" in length. Place two boards at each side and the remaining three evenly spaced out. Then attach all boards with 2 1/2" Wood Screws.