DIY Pinhole "Lens" for Vintage-Looking Photographs

by noahstrausser in Circuits > Cameras

2687 Views, 14 Favorites, 0 Comments

DIY Pinhole "Lens" for Vintage-Looking Photographs

NIKONLENS.jpg

The Pinhole Camera was the first kind of camera. The concept was discovered in the fifth century and used to take inverted photographs. It was a light proof box with a very small hole (Fixed Aperture) for light from a certain scene to pass through and put an inverted image on the other side of the box. This could be used to put an image on film.

In this Instructable, we will be making a Pinhole Lens for a modern DSLR or a slightly less modern (but still awesome) SLR Camera. With this "lens" you will be able to photograph vintage looking pictures or very artistic pictures because of the fuzziness, slight vignetting, and mild blur. The depth of field on pinhole lenses is basically infinite but some blur is still there because of other factors.

Required Materials

IMG_20150113_193151.jpg
IMG_20150113_193301.jpg
IMG_20150113_193244.jpg
IMG_20150113_194110.jpg

This Instructable doesn't need too many materials. This process can be adjusted depending on what tools you do and don't have.

1. DSLR or SLR camera. This is pretty important for obvious reasons... A Mirrorless Camera (not point and shoot) will also work.

2. Body Cap for the camera. You should use one of these although an old plastic card could work.

3. Something to drill the hole in the body cap. I would strongly recommend a drill press although it could be done differently a drill press will give you the cleanest hole. A small drill bit is also necessary.

4. Foil Tape (optional). This will allow you to adjust aperture size for a clearer dimmer image, (long exposure) or a fuzzier, more blurred, and brighter image(short exposure).

Drilling the Hole.

IMG_20150113_193427.jpg
IMG_20150113_193600.jpg
IMG_20150113_193948.jpg

This is the step where you will put the cap on the drill press and drill a hole in the exact (as close as possible) middle. This can also be done with a cordless drill at the sacrifice of accuracy.

Finish the Lens.

IMG_20150113_194110.jpg
IMG_20150113_194200.jpg
IMG_20150113_194445.jpg

Now that you have the hole, you may want to adjust the size. Begin by taking foil tape and covering the hole with it. Now that you've done that, punch a hole whatever size you want, but not while it's on the camera. I chose the size of a resistor lead. You will be surprised at how much the picture varies when you adjust the hole size.

The Final Result.

IMG_20150113_194527.jpg
IMG_20150113_194534.jpg
IMG_20150113_202122.jpg
IMG_20150113_202142.jpg
IMG_20150113_202213.jpg
DSC_0980.JPG
DSC_0939.JPG

By now, you should have a competed lens ready to shoot some pictures! Enjoy the artistic look and try different exposure lengths. Just make sure you camera is on the MANUAL or M setting or else it will read NO LENS.

Enjoy your new "lens" and feel free to leave a comment.