DIY Pineapple House

by mulhera20 in Craft > Reuse

19 Views, 0 Favorites, 0 Comments

DIY Pineapple House

1000002970.jpg
IMG_2681.jpeg

We made a house out of a pineapple

Supplies

IMG_2686.jpeg
1000002991.jpg
IMG_2656.jpeg
IMG_2672.jpeg

The supplies we used:

1 pineapple

1 tray

3 skewers

1 knife

3 sponges

black paint

paint brush

a ball of yarn

Scissors

(Along with gloves and a marker)

Cut the Top Off

IMG_2679.jpeg

We took our knife and slowly cut the top and set it to the side because we need it later.

Empty the Pineapple

IMG_2659.jpeg
IMG_2691.jpeg

After cutting the top off, we then emptied out the pineapple using out knife and hands (with gloves). It is better to use a ripe pineapple that way it is easier to empty it.

Door and Windows

1000002949.jpg

After clearing the inside of the pineapple, we cut out a door and two windows.

Make a Character

IMG_2670.jpeg
IMG_2671.jpeg
IMG_2669.jpeg

For the inside of the house, we made a character (Scribblebob) using one of the sponges and the skewers and the marker. We cut the sponge into a smaller square, we then cut the arms and the legs 1 inch each. We then gave him a face with marker.

Bed and TV

IMG_2684.jpeg
IMG_2685.jpeg
IMG_2676.jpeg
IMG_2674.jpeg
IMG_2673.jpeg

After making our character, we made a bed using the second sponge, we made a small pillow using a small cut piece about 2cm wide from the 3rd sponge. We cut two 1cm long pieces from the skewers and attached the pillow to the bed. To add to it we made a crochet blanket out of yarn. After that we cut a TV out of the third sponge and painted it black. Once it dried, we stuck 4 pieces of Skewers all 1.5cm long.

Add Everything

1000002963.jpg
1000002964.jpg

Once done with everything, we put it all inside the pineapple. We lost the picture with the TV but we attached it to the wall of the pineapple above the bed and set the bed on the bottom along with out character and the blanket.