'Public Education' Keys Rack Using Upcycled Bike Spokes

DIY Assembly Video; Keys Rack made using 3Dprinting & Upcycled bicycle spokes to create the 'Public Education' wall mount keys rack. A 'Tongue in Cheek' comment about the state of our public education system. as in: the results of :). Part of a series of videos showing how to use reclaimed/recycled/upcycled bicycle spokes, combined with 3D printing, to create useful household items. Easy to print and assemble.

Supplies:

3DPrinter Filament {Your choice of color and material type} ► https://amzn.to/3y0HY6j

Reclaimed Bike Spokes [How To Video on YouTube]

JB Weld {Recommended for this application} ► https://amzn.to/3xVr6xZ

Tools:

8" Mini-Bold Cutter Similar to ► https://amzn.to/3opUk4Q

Mini-Hammer multitool ► https://amzn.to/3GjQLU6

Long nose pliers similar to ► https://amzn.to/3Dw4EfL

Exact-o knife & blades similar to ► https://amzn.to/3psvyAf

Hand drill & bits similar to ► https://amzn.to/3Inomhr

Instruction Set

Assembly Video on YouTube

1. 3D Print the Keys Rack base unit: {STL} file. You will need to determine settings and slice it using whatever slicer your 3Dprinter requires. Filament choice is yours, any will do, as is color :).
2. Trim Spokes to 17mm
3. Mix Epoxy / Adhesive: I recommend 2part JB-Weld. {Second choice would be 'Superglue-GEL' or equivalent}
4. Install / Insert Trimmed Spoke Ends
5. Allow the epoxy to cure. [24hrs. for recommended epoxy]
6. Mount [the unit is XX wide by YY and should be placed for easy access.]

Mounting Holes provided will fit {2x} #8 or #10 screws.

1. Ta Da ! :) i r gud splr yup. ;)