DIY Nespresso Capsule Holder

Hello and welcome to this instructable.

You can create your own design in inkscape or use the one provided

1 x Fablab, or access to a lasercutter

1 x 300mm wide 600mm long 3mm plexi

Your lasercutter should be configured to CUT red lines and Engrave BLACK. The material should be configured to be 3mm plexi

Remove the correct parts from the lasercutter and assemble.

You can glue the parts together using specific plexi glue.

Enjoy!

1) When buying caps they come in boxes of 10. The Design should be modified to hold 10 caps per row

2) Base text: the text is not centered and also doesnt make sense because you cant read it when filled with capsules

3) Base: Either make the base larger so it supports the weight better (but seems fine for now) or change the design to brackets.

4) Sides: Change the design so it has sides; this will help stability