DIY Nerf H.A.M.P.

Here is a video I made showing you how to make a H.A.M.P. (High Air pressure Manual Pump) out of PVC. This gun will shoot Nerf darts, slugs, and stefans up to 100 feet. This is a great gun to use at Nerf wars or just in your back yard shooting targets.

Thank you for watching and please like, subscribe, comment, and follow my page.

My Youtube channel: http://www.youtube.com/channel/UC8_MbAgA8TzSWumV6b...

instructables page: https://www.instructables.com/member/Msurvival/

A length of yarn

Duct tape

Cutting too ( in my case I used a coping saw)

PVC cement (optional)

You will need to cut a 3" piece from the 2" PVC to connect the elbows together.

2" PVC (The length is up to you I chose to cut a 2ft in piece)

1" PVC (The length is up to you I chose to cut a 1ft 10-1/2 in piece)

Two 2" elbows

1/2" PVC (The length is up to you I chose to cut a 1ft 10in piece)

Reducers/PVC Bushings:

2" to 1-1/2"

1-1/2" to 1"

1" to 1/2"