DIY Key Phone Holder

Organization In the home can be hard to maintain, especially with numerous phones and keys in the house. We made a DIY phone charger and key holder to fix this. Homes can be cluttered very easily without an organizer to keep them held. It's also very easy to lose your keys and/or phone if you don't have a designated place for it. Anyone with a home, phone, and keys would need this. Our desired outcome would be an organizer that is appealing to the eye but useful for everyone.

• Pallet
• Wood Glue
• Wooden Dowel rod

Cut 4 peices off of the pallet. Next plane them down to the desired thickness. Cut all pieces to specified dimensions.

After cutting the uprights for the phone holder, take one of them and drill an inch in diameter hole on the center top. Next drill 3 holes of the specified distance apart into the dowel rod.

First, draw a line of the correct spacing between the two up rights. After letting the up rights dry for 5 minutes, now you can glue in the phone slots. After they have set for 10 minutes, then you can glue the key holder part to the hole in the inside up right.

After all the glue has dried, you can finish sand all the surfaces to 220 and oil the stand if you please.