DIY Jerk Balloon Stress Balls
Life can get stressful, so we’re going to show you how to make some cheap and easy stress balls using our Jerk Balloons.
What you’ll need:
All-purpose Flour
Two empty water bottles
Crazy Glue (optional)
Step: 1
Cut one water bottle in half.
Step 2:
Use the wide end of the bottle to scoop the flour and funnel it into the second water bottle.
Step 3:
Blow up a balloon and twist the end.
Step 4:
Keeping it twisted, stretch over the mouth of the water bottle that is filled with flour.
Step 5:
Flip over the bottle and shake into the balloon.
Step 6:
Slowly let out the air in the balloon and gently massage the flour, removing any air pockets.
Step 7:
Trim the Balloon as shown.
Step 8:
Trim another Balloon as shown.
Step 9:
Stretch this balloon over the balloon filled with flour, covering the hole. Repeat this step 4-5 times, covering the previous hole. This will keep the flour secure.
Step 10:
To make sure the balloon stays in place, glue along the inside of the hole. If you use enough layers of balloons however, you can skip this step.
Step: 11
Enjoy! Or buy a pre-made stress ball here.