DIY INSTRUCTABLE ROBOT

TO MAKE THIS INSTRUCTABLE

YOU WILL NEED

BALSA WOOD

GLUE/GUN

PAPER CLIP

UTILITY KNIFE

WIRE CUTTER

AND A PERMANENT MARKER

FIRSTLY THE HEAD, CUT A BLOCK OFF YOUR CHOSEN WOOD, 1/2 INCH WIDE AND 3/4 INCH HIGH

GRAB YOUR PAPER CLIP OPEN IT UP,USING YOUR WIRE CUTTER CUT ABOUT 1 & 1/2 INCH OFF

CUT THE PAPER CLIP THAT HAS BEEN CUT OFF, AT EACH END AT AN ANGLE

NOW PUSH THE WIRE THROUGH THE MIDDLE OF THE BLOCK OF BALSA WOOD

CUT 1 & 1/2 INCH BY 1 INCH OFF YOUR BALSA WOOD FOR THE BODY

GLUE THE HEAD ONTO THE BODY

FOR THE ARMS, CUT A THIN 2,MM BY 1 INCH LONG PIECE OF WOOD (USING THE UTILITY KNIFE) CUT THE TIPS OF THE ARM FOR HANDS, THEN GLUE AT AN ANGLE THE ARM 5 CM DOWN THE BODY.

FOR THE LEGS 3/4 INCH LONG BY 10,MM WIDE WOOD , AND GLUE TO THE BODY

USE 3 SMALL PIECES OF WOOD AND COLOUR BLACK THEN GLUE TO THE FRONT OF THE BODY

CUT 1 INCH LONG AND THIN WOOD ,AND GLUE UNDER THE 3 BLACK BITS OF WOOD.

DRAW A LINE FOR THE MOUTH USING BLACK MARKER

FOR THE EYES 2 TINY BITS OF WOOD COLOURED RED , MAKE ONE EYE SLIGHTLY LONGER,THEN GLUE

EARS 2 BITS OF WOOD MARKED RED,THEN PUSH ONTO THE WIRE WITH GLUE

THEN COLOUR THE REST WHAT EVER COLOUR YOU LIKE

AND THAT IS THAT.

PLEASE BE CAREFUL ESPECIALLY WHILST USING THE KNIFE.

SORRY THERE IS NO VIDEO

BUT MY NEXT PROJECT WILL HAVE VIDEOS.

HAVE A GREAT XMAS

AND HAPPY CRAFTING

FINAL PIECE

NAME YOUR ROBOT

MY ROBOTS NAME IS

KENDO

THE END