DIY Harry Potter Deathly Hallows Ring

Is it possible to show your undying love for Harry Potter with just one piece of jewelry? It can be done with the Harry Potter Deathly Hallows Ring.

This DIY is great for potterheads . It's easy.

proper jewelry wire

round nose pliers

regular pliers

scissors or plier cutters

Take the doing nose pliers and make a circle

leave some wire at start as show in pic

For the bridge of the glasses you'll need to make a little bump..

refer pic

after making bridge make an another circle

Bend the wire around the rest of the circle so the excess wire is pointing away from the glasses

make a ring and form it to your finger size

now take other side of wire and bend it as show in pic using nose plier

Now to make the Cloak of Invisibility. To begin, Depending on how you want it to look, you can use flat nose pliers or round nose pliers to make the corner.

Bend the wire down precisely where it crosses the elder wand.

To complete the triangle,Create the final corner at the same height of the first corner.

Next, take your round object you've decided to use. Hold the wire with your thumb and bend the end of the wire around it to create your circle. Bend the wire far enough to let it touch the tringle as shown.

sorry guys i am not very good with the wire bending but i am sure that you can surely make even better than me.

Love you guys byeeeeee