DIY Halloween Fountain

Materials Needed:

• Pumpkins
• Water Pump
• Water Pipe
• Plastic DC T-connector
• Red LED Strip
• LED Adopter
• Electric Wire
• Plug
• Planter

Tools Needed:

• Knife
• Drill
• Scissor

Decorative Items:

• Plants
• Bricks
• Sand

So let's start.

We need 2 pumpkins

• Take a knife and give a square cut on the top the pumpkins.
• Take a spoon and clear up the inner stuff of the pumpkins.
• Now take a pen and draw Deman eye, nose, and mouth.
• Then give a cut with a knife.
• Then with small pcs of pumpkins make the shape of deman teeth and place them in the mouth.

Now take the square cut of the pumpkins.

• Place the LED Strip on the inner surface of both square cuts of pumpkins.
• Then make a parallel connection of the LEDs.
• And connect them with the LED Adopter.

Watch the full video on YouTube and don't forget to Subscribe and Share:

Now we need a base

• Place the planter on the base.
• Cover the base with bricks and sand.
• Place the pumpkins on the top the planter.
• And decorate with some plants.

• Take a water pump cover with a pc of cloth, so the dust particles don't affect the pump.
• Place the pump on the planter and connect the pump with a water pipe and Plastic DC T-connectors.
• Make a hole with a drill in the middle of the pumpkins and fit the T-connectors.

Now take the square cuts of the pumpkins with the LEDs.

• Place them on the top of the pumpkins.
• Fill the planter with water
• And switch on the water pump and LEDs.

Finally, the Halloween Fountain is ready.

Watch the full video on YouTube and don't forget to Subscribe, Share and VOTE: