DIY, HAND ROUTER,OLD LADY,S TOOTH

WHAT YOU WILL NEED

DRILL

SHARP CHISEL

HAMMER,MALLET

6 INCH LONG BY, 2X1 INCH PIECE OF WOOD

AND A COUPLE OF CLAMPS

THIS IS A QUICK AND EASY TO MAKE INSTRUCTABLE

AND IF DONE PROPERLY WILL GIVE YOU GREAT RESULTS.

SO, CLAMP YOUR BIT OF WOOD TO YOUR WORK AREA

NOW WITH YOUR DRILL.

DRILL FROM THE FACES EDGE NEAREST TO YOU

AT A 45 DEGREE ANGLE

START DRILLING .

YOU CAN GO STRAIGHT THROUGH OR STOP AT 3/4.

NOW,

GRAB A GOOD SHARP CHISEL

AND HAMMER THE CHISEL THATS SLIGHTLY WIDER THAN YOUR DRILL HOLE.

HAMMER UNTIL THE TIP OF THE CHISEL IS SHOWING THEN STOP.

NOW YOU HAVE A HAND CHISEL THATS KNOWN FROM YEARS AGO.

ITS CALLED-.

THE OLD LADY,S TOOTH.

IF YOU USE A DESCENT CHISEL YOU WILL BE AMAZED AT HOW WELL IT CAN CUT CLEANLY THROUGH WOOD ETC,ETC

THANK YOU FOR TAKING THE TIME TO READ OR DO IT FOR YOURSELF.

BEST WISHES

UTOPIA