DIY GoPro Hero Hand Clamp Mount

Equipment Needed:

Draper 152mm Spring Clamp ( or similar)

1/4" Nut and Bolt (from most hardware shops, harder to find in the UK)

Tripod Adapter Mount Bracket Stand For GoPro

Tools Needed:

Drill

6 or 7mm drill bit

Flat Head Screw driver

Adjustable spanner

Drill a hole at the top of the handle on the Hand Clamp. The drill bit I used was about 6 or 7mm, I'm not sure.

Push or screw in the bolt through the hole. The bolt head should fit snug on the inside of the Hand Clamp Handle. Once you've done this just add the nut to the other side and tighten using a spanner and screw driver.

Screw on the Go Pro Tripod Mount to the top of the bolt and then attach your Go Pro