DIY Garden See-Saw Water Feature
Let's spice up our garden with this See-Saw fountain.
Materials Needed:
- Bucket*2
- Steel Pipe 10 mm https://amzn.to/2TIPzWn
- PVC Pipe 1/2 inch
- PVC Casing
- PVC L-Joint
- Marble Ball 8mm(appx) https://amzn.to/2FhqJ7c
- Water Pump https://amzn.to/2BZ3BZe
- Aquarium Pipe Kit: https://amzn.to/2FeKE5g
- Straw
- Screw
- Drill
- M-seal
- Hot Glue: https://amzn.to/2C6weEh
- Silicone Sealant
- Super Glue: https://amzn.to/2TI6zw2
- Stones
The Balancing Pipe
For balancing the steel pipe a small PVC pipe needs to attach on the middle of the steel pipe with a small hole to attach the pipe.
Put a marble inside the steel pipe and block it with PVC O-rings and attach the L-joint.
Watch the full making of this project on YouTube:
The Base
Join the 2 boxes for water storage with PVC as shown
The Final Setup
Assemble the balancing pipe and boxes with PVC casing for the stand and balance it with the screw.
Join the aquarium pipe with it and connect a water pump.
Attach the pipe and connect with pump, fill it with stones and water
Now my garden looks beautiful with this Garden see-saw water feature, why don't you try to decorate yours and let us know.
Check out the full making on YouTube:
Check out more DIY Crafts made by RusticKraft Channel on YouTube and don't forget to Share and Subscribe: youtube.com/rustickraftchannel