DIY Four-leaf Clover in Resin
by Mechanical bro in Circuits > Art
9784 Views, 81 Favorites, 0 Comments
DIY Four-leaf Clover in Resin
Things required are listed below
1)Resin
2)Sand paper
3)Four-leaf clover
4) flat plastic piece (for mould)
5)car polishing past (or) any polishing past
6)Weight machine
7)Burner
8)Holder
Preparation of Mould
We prepare mould as per required dimensions.here ihave taken rectangular mould as shown in figure
Preparation of Resin
I have taken 20 gram of Resin and 8 grams of hardener
pour this in half of the mould
pour this in half of the mould
Placing Four-leaf Clover in Mould
Four-leaf clover is placed in the mould with the help of holder
Filling Another Half of Mould
Fill another half of mould with Resin as show in above fig
Remove Outer Plastic Parts(mould)
when resin gets hard Remove the outer plastic (mould) by heating as shown in figs
Shape With Sand Paper
After removing outer plastic parts (mould) we have to get it to required shape by 1) gritty sandpaper 80
2)we snad paper with water
Grading 360,600,1000,1500,2000
2)we snad paper with water
Grading 360,600,1000,1500,2000
Polishing
we using the car polishing past
FINAL RESULT
