DIY Fondant Flower Forming Cups
by midiansangel in Living > Kitchen
1634 Views, 1 Favorites, 0 Comments
DIY Fondant Flower Forming Cups
Flower forming cups can be very expensive, so why not try this as a less costly alternative?
You Will Need
A drill.
A small drill bit.
Sandpaper.
Economy paint pallets.
Ensure that the pallets you purchase have a dome bottom, the flat ones will be of no use.
These can cost as little as 50p, which is a lot less than a forming cup.
A small drill bit.
Sandpaper.
Economy paint pallets.
Ensure that the pallets you purchase have a dome bottom, the flat ones will be of no use.
These can cost as little as 50p, which is a lot less than a forming cup.
Drill Holes in Bottom of Each Cup
Take your drill, with a small drill bit, I'd say no bigger than 2mm.
Drill a hole in the bottom of each cup. Make sure your hole is as close to the centre as possible
Drill a hole in the bottom of each cup. Make sure your hole is as close to the centre as possible
Sand Off Scuffs
Turn your pallet upside down and, using the sandpaper, sand off any scuffs left by the drilling process.
Wash and Use
Wash the pallet.
It's now ready to use.
If you need to insert a wire, stand your tray on a cooling rack so the wire can hang below.
It's now ready to use.
If you need to insert a wire, stand your tray on a cooling rack so the wire can hang below.