DIY Filigree Mask

by miranda_sarmi in Craft > Fashion

3433 Views, 24 Favorites, 0 Comments

DIY Filigree Mask

portada.jpg
IMG_20190224_170104.jpg
IMG_20190224_164820.jpg

Hello, and welcome to my first Instructable.

In this tutorial I will show you how to build step by step a beautiful filigree mask that can serve as decoration on a shelf or you can use it at any party or family gathering.

Gather Your Materials

IMG_20190217_170211.jpg
  • Some filigree paper strips 28 cm long x 5 mm wide and 70 cm long x 5 mm wide in color: white, fuchsia, lilac, light green, dark green, violet, yellow, light orange, dark orange.
  • Glue or pegastic.
  • A mold of plastic mask.
  • Scissors.
  • Violet ribbon.

First Steps

DIY Filigree Mask - First steps
IMG_20190217_103955.jpg
IMG_20190217_104008.jpg
IMG_20190217_104035.jpg
IMG_20190217_104045.jpg
IMG_20190217_104100.jpg

You must make 106 white rolls of different sizes to fill the bottom of the mask, some tighter and some looser (watch the following video).

With this same process we make all the mask (See the images attached to this step).

Preparing More Filigree Rolls

IMG_20190223_114553.jpg
IMG_20190217_164555.jpg
IMG_20190217_164614.jpg
IMG_20190217_174358.jpg

Divide some 70 cm long strips of fuchsia and lilac in four equal parts.

Make tight rolls, 36 fuchsia rolls and 12 lilac rolls for each eye.

Eye Contour

IMG_20190217_174428.jpg
IMG_20190217_175444.jpg
IMG_20190217_182425.jpg
IMG_20190217_191705.jpg
IMG_20190217_194606.jpg

Around the eye contour of the mask mold paste one roll after another fuchsia color, and on the upper side of the contour paste lilac rolls in the form of eyebrow.

Lower Edge of the Mask

IMG_20190218_165326.jpg
IMG_20190218_165421.jpg
IMG_20190218_165425.jpg
IMG_20190218_174658.jpg
IMG_20190218_192858.jpg
IMG_20190218_192924.jpg
IMG_20190218_165320.jpg

Divide the light green 70 cm strip into four equal parts. Make a loose roll, pinch the two ends and then take one end to the right and another to the left.

Then glue one end of the figure with the end of the other figure and thus make the bottom edge.

White Mask Background

IMG_20190219_105346.jpg
IMG_20190219_105428.jpg
IMG_20190219_105439.jpg
IMG_20190219_105229.jpg
IMG_20190220_095254.jpg
IMG_20190222_093746.jpg
IMG_20190223_164748.jpg

First we made a roll in the shape of a tear to place it in the middle of the eye and eyebrow (See the first three photos of this step).

Then, with the 106 white rolls, some bigger and some smaller, we fill the bottom of the mask as seen in the photos (See the other photos of this step).

Splice Colors for the Flower

IMG_20190222_155623.jpg
IMG_20190222_155656.jpg
IMG_20190222_155801.jpg
IMG_20190222_155807.jpg
IMG_20190222_155830.jpg
IMG_20190222_161327.jpg
IMG_20190222_161713.jpg

Glue a paper tape with the other paper tape to achieve the desired gradient, in this case yellow and orange.

Put Together the Flower

IMG_20190224_164520.jpg
IMG_20190222_161749.jpg
IMG_20190222_161857.jpg
IMG_20190223_133556.jpg
IMG_20190222_161911.jpg
IMG_20190222_164138.jpg
IMG_20190222_164155.jpg
IMG_20190222_164227.jpg
IMG_20190222_165946.jpg
IMG_20190222_165949.jpg
IMG_20190222_170001.jpg
IMG_20190222_170018.jpg
IMG_20190222_170047.jpg
IMG_20190222_193234.jpg
IMG_20190222_195034.jpg

To assemble the flower you need: Petals (yellow and orange), center (orange and yellow), details (purple rolls), leaves (green) The corresponding figures are assembled and pasted as shown in the photos.

Finishing

IMG_20190222_195146.jpg
IMG_20190222_195408.jpg
IMG_20190223_103424.jpg
IMG_20190223_103412.jpg

The filigree mask is carefully removed from the base mask.

Finally, you can insert a violet ribbon to use your mask.

I hope that you all enjoyed this Instructable! Thanks for
reading and watching.

Miranda.